1. Export the file as an STL
  2. Load the STL into Cura
  3. Adjust your settings for PLA
    1. Polaroid Silk PLA: I used 200C for the Hotend and 50C for the Bed Temperature
    2. The smaller the layer height the slower but finer the detail
  • Save the file to your SD card
  • Insert the SD card into your 3D Printer and Print!
  • Load your cloud planter into your desired slicer (I used Cura) and 3D Print in your favorite filament.

    Cactus do well in these planters 🌵.

    Leave a Reply